Adding a basement apartment is one of the most common ways Ontario homeowners create rental income or room for family. The part that usually gets underestimated is sound. A suite can pass its inspections and still leave the people upstairs hearing every conversation, TV show and footstep below them, and the reverse is just as common.
This guide explains how noise moves between a basement suite and the floor above, what the Ontario Building Code’s sound ratings actually measure, and which questions to settle with your designer and building department before the ceiling gets closed in. We’re residential soundproofing contractors in Toronto and the GTHA, not engineers or building officials, so we’ll be clear about where our role ends and theirs begins.
First, Who Is Making the Decision?
The right approach depends a lot on who owns the problem.
Owner-occupiers live upstairs and rent out the basement, or set it up for an adult child or a parent. You’ll hear every weakness in the separation yourself, every night. Your priorities are usually privacy, sleep and keeping a good relationship with the people below.
Landlords with multiple units may be dealing with a duplex, a triplex or several floors in one building. Not every unit has a basement, and separation between the main and upper floors matters just as much. The decisions are about consistency across units, tenant turnover and planning work around occupancy.
Both face the same physics. What differs is the scope, the budget logic and the timing.
How Sound Travels Between a Basement Suite and the Floor Above
“Noise” is really several different problems, and each one takes a different route:
- Airborne sound: voices, TV, music. It travels through the air, makes the ceiling and walls vibrate, and gets re-radiated on the other side.
- Impact sound: footsteps, dropped objects, chairs dragged across a floor. It goes straight into the floor structure and travels through the joists. Footsteps from upstairs are often the number-one complaint in basement suites.
- Plumbing and mechanical noise: drain lines, the furnace and ductwork. Duct runs shared between units can carry conversations from one suite to the other.
- Flanking: sound that goes around the separating ceiling instead of through it, by way of perimeter walls, rim joists, stairwells, pot lights, outlets and gaps at the edges.
That last one is why two basements with “the same” ceiling can sound completely different. A well-built ceiling can be undermined by an unsealed duct or a row of recessed lights.
New Construction vs Renovation: Why the Code Route Matters
The 2024 Ontario Building Code addresses sound separation between dwelling units, but which requirement applies depends on your project. Is it new construction or a renovation of an existing house? How old is the building? Which compliance path does your designer choose? That’s why “you need STC 50” isn’t a complete answer, and why your designer and building department need to confirm the route for your specific project.
The Part 9 Route: STC 50 or ASTC 47
Under the Part 9 provisions for housing, dwelling units are generally separated using one of two approaches:
- a separating assembly and its adjoining constructions that together achieve an ASTC rating of at least 47, or
- a separating assembly with an STC rating of at least 50, combined with adjoining construction that follows the Code’s prescriptive requirements.
The Part 11 Route for Existing Houses
Part 11 of the Code covers renovations. For qualifying existing houses that contain a secondary suite, it includes compliance alternatives with lower sound ratings than Part 9, including STC 43 and ASTC 40 options. Eligibility conditions apply. Many Ontario municipalities, for example, note that a building must be a certain age before Part 11 can be used. Don’t assume your project qualifies. Ask your building department or designer to confirm it.
STC vs ASTC: A Lab Number vs Your Actual House
These two ratings are easy to mix up, and the difference matters:
- STC (Sound Transmission Class) rates an assembly for sound passing directly through it, usually based on laboratory testing.
- ASTC (Apparent Sound Transmission Class) rates the separation between two real spaces. It counts the direct path and the flanking paths around it.
Because flanking is always present to some degree in a real building, a field result is typically equal to or lower than the lab rating for the same build. A ceiling with a good STC rating on paper doesn’t automatically mean the people upstairs will hear less. How the details around it are built matters just as much.
What About Footsteps?
STC and ASTC measure airborne sound. Impact sound is rated separately, with IIC (Impact Insulation Class), and the two aren’t interchangeable. A ceiling that blocks voices well can still let footsteps through. If footsteps from upstairs are the main complaint, plan for impact noise specifically rather than assuming a code-level airborne rating covers it.
Construction Considerations to Discuss With Your Team
Every basement is different: joist type, ceiling height, where the ducts and drains run, and whether the ceiling is open or finished. So no single assembly is right for every suite. These are the areas a qualified design and installation team should address (our ceiling and floor soundproofing methods go into more detail):
- The joist cavity: whether and how it’s filled with sound-absorbing insulation.
- Decoupling: whether the new ceiling is isolated from the joists so vibration has a harder time passing through, and how the installation avoids accidentally “short-circuiting” that isolation. Our guide to basement ceiling soundproofing compares resilient channel, isolation clips and direct attachment.
- Mass and damping: how much the ceiling layers weigh and whether damping is used between them.
- Perimeter continuity: sealing and detailing where the ceiling meets the walls, so sound doesn’t simply go around it.
- Penetrations: pot lights, electrical boxes, plumbing and duct openings are where good assemblies tend to fail.
- Doors and shared spaces: shared stairwells, laundry rooms and the doors between them.
- Fire separation: in a secondary suite, the same ceiling often has to meet fire separation requirements too. Sound and fire are separate requirements, so the design has to satisfy both.
Plumbing, HVAC, gas and electrical changes need the appropriate licensed trades and permits. They aren’t DIY items.
If the Ceiling Is Already Finished
Many basement suites are created in spaces that are already drywalled, and that changes what’s practical:
- Headroom. Adding layers or isolation systems below an existing ceiling uses up height, and basements rarely have much to spare.
- Access. Some improvements need access to the joist cavity, which can mean small openings or removing sections of the ceiling, depending on what’s inside.
- Disruption. Expect some patching, finishing and painting, and plan the work around anyone already living in the space.
Some finished ceilings are good candidates for cavity-fill retrofits. Others need a new isolated ceiling layer, or opening up the ceiling to treat the problem properly. A site assessment is the honest way to tell which one you’re looking at.
Questions to Ask Your Building Department or Designer
Before construction starts, get clear answers to these:
- Is this project being reviewed as new construction or as a renovation under Part 11, and does the building qualify for Part 11?
- Which sound transmission route is the design using (STC or ASTC), and what rating is it targeting?
- Which tested assembly or design basis is the drawing relying on, and what are its adjoining-construction requirements?
- Does the municipality require a sound transmission design declaration or other documentation with the permit application?
- How does the sound separation work alongside the required fire separation?
Keep copies of your permit drawings, the assembly details the design is based on, product data for the materials installed, and photos of the ceiling before it’s closed in. If questions come up later, those records are far more useful than memory.
Frequently Asked Questions
Does every basement suite in Ontario need STC 50?
Not necessarily. STC 50 is one Part 9 route. Part 9 also allows an ASTC 47 route, and qualifying renovations of existing houses may be able to use Part 11 alternatives with lower ratings. Which one applies depends on your project. Your designer and building department confirm it.
What are the Part 11 alternatives?
Part 11 provides compliance alternatives for renovating existing buildings, including options for houses with a secondary suite. They come with conditions, so confirm your building is eligible before relying on them.
Can a soundproofing contractor certify that my suite is code compliant?
No. Compliance is determined through the permit process, by your building department, based on drawings prepared by a qualified designer. A contractor like Inaudible can help you understand the noise problem, discuss practical options, and install the specified work carefully. We don’t issue stamped engineering reports or certify code compliance.
Will meeting code mean my tenants won’t hear each other?
Code minimums set a baseline. They don’t guarantee silence. Footsteps, flanking paths and mechanical noise can still be noticeable, which is why many owners treat the code as the floor rather than the goal.
Soundproofing a Basement Suite in Your Own Home?
If you live upstairs and you’re planning or fixing a basement suite, we’ll look at what you’re hearing, how your ceiling is built, and what’s realistically possible in your space. , request a quote, or call us at 416-466-1476.
About the author: Pascal Fontaine-Ferrand is the founder of Inaudible Inc., a soundproofing and drywall contractor serving homeowners, landlords and builders across Toronto and the Greater Toronto and Hamilton Area. Inaudible provides soundproofing installation and practical, contractor-led acoustic consulting; it is not an acoustic engineering firm and does not issue stamped engineering reports.
Inaudible Inc. · 65 Main St S, Waterdown, ON L0R 2H0 · 416-466-1476 · inaudible.caw your ceiling is built, and what’s realistically possible in your space.